; USAGE: Copy this file and rename it to platformio_override.ini
;
; The platformio_override.ini file is not overwritten or monitored by git
; ONLY edit platformio_override.ini to make local changes to the parameters

[platformio]
extra_configs =
    ; Uncomment or edit the lines to show more User Setups in the PIO sidebar
    ; user_setups/darwin_sdl/*.ini
    ; user_setups/esp32/*.ini
    user_setups/esp8266/*.ini
    ; user_setups/linux_sdl/*.ini
    ; user_setups/stm32f4xx/*.ini
    ; user_setups/win32/*.ini

[override]
; -- Hasp config options --------------------------------------
build_flags =
; -- Uncomment the next line to use the file include/user_config_override.h settings
;    -DUSE_CONFIG_OVERRIDE

;region -- Default Build Environments : Used when Build All ---
extra_default_envs =
    ; Uncomment specific environments or create extra:
    ; arduitouch-esp32_ili9341
    ; d1-mini-esp32_ili9341
    ; d1-mini-esp8266_ili9341
    esp12e_ili9341
    ; d132-unoshield
    ; esp12e-st7735
    ; esp32dev-mrb3511
    ; esp32dev-ili9488
    ; lanbon_l8
    ; lolin-d32-pro_ili9341
    ; my_custom_build
    ; nodemcu32s-raspi
    ; wt32-sc01
    ; ttgo_esp32_poe-ili9341
;endregion

;region -- Define your local COM ports for each environment ---
[env:d1-mini-esp32_ili9341]
monitor_port = COM6       ; Change to the correct port
upload_port = ${env:d1-mini-esp32_ili9341.monitor_port}

[env:d1-mini-esp8266_ili9341]
monitor_port = COM5       ; Change to the correct port
upload_port = ${env:d1-mini-esp8266_ili9341.monitor_port}

[env:esp12e_ili9341]
monitor_port = COM5       ; Change to the correct port
monitor_rts = 0
monitor_dtr = 0
upload_port = ${env:d1-mini-esp8266_ili9341.monitor_port}

[env:esp32dev-mrb3511]
monitor_port = COM3       ; Change to the correct port
upload_port = ${env:esp32dev-mrb3511.monitor_port}

[env:d132-unoshield]
monitor_port = COM9       ; Change to the correct port
;upload_port = ${$env:d132-unoshield.monitor_port}
upload_port = 192.168.4.4 ; IP of the ESP
upload_protocol = espota  ; Use ArduinoOTA after flashing over serial
upload_flags = --port=3232 ; --auth=haspadmin   ; OTA password

[env:ttgo_esp32_poe-ili9341]
monitor_port = COM9       ; Change to the correct port
;upload_port = ${env:ttgo_esp32_poe-ili9341.monitor_port}
upload_port = 192.168.4.5 ; IP of the ESP
upload_protocol = espota  ; Use ArduinoOTA after flashing over serial
upload_flags = --port=3232 ; --auth=haspadmin   ; OTA password

[env:lolin-d32-pro_ili9341]
monitor_port = COM5       ; Change to the correct port
upload_port = ${env:lolin-d32-pro_ili9341.monitor_port}
;endregion

;region -- Custom Environment configuration example -----------------
[env:my_custom_build]
extends = esp32
board = nodemcu-32s

upload_port = COM12     ; To change the port, use platform_override.ini
monitor_port = COM12    ; To change the port, use platform_override.ini

board_build.partitions = user_setups/esp32/partitions_4MB.csv ; default.csv

debug_tool = esp-prog
debug_init_break = tbreak setup
build_flags =
    ${env.build_flags}
    ${esp32.build_flags}
;region -- TFT_eSPI build options -----------------------------------
    ${lcd.lolin24}
    ${esp32.vspi}        ; Use VSPI hardware SPI bus
    -D TFT_DC=5
    -D TFT_CS=26 
    -D TFT_RST=-1        ; RST
    -D TFT_BCKL=22       ; None, configurable via web UI (e.g. 21)
    -D TOUCH_CS=17       ; (can also be 22 or 16)
; -- Options ----------------------------------------
    -D HASP_USE_TELNET=1
;endregion

;endregion